Solar Angle?

The Objective : I wanted to test whether the power solar panels produce is affected by the angle at which they are mounted. I thought the angle that the solar panels are mounted play a significant role in the amount of power they produce, because the solar panels produce the most power when they are perpendicular to the sun. As the earth rotates, the path of sunlight constantly changes, therefore, causing the solar panels to produce different amounts of power at various times.

Methods/Materials

I had three different types of panels: monocrystalline, polycrystalline, and monocrystalline-hybrid. I chose four different angles to mount the panels at, and then used a volt meter to record the amount of power each panel produced at the different angles.

To find the angle at which the panel would be perpendicular to the sun, I subtracted the suns altitude angle obtained from the U.S. Naval Observatory website from 90 degrees.

On the first set of tests, this angle was 58.3 degrees (90 degrees-31.7 degrees). On the second set of tests, this angle was 59.7 degrees (90 degrees-30.3 degrees). The first set of tests took place at 1:45 p.m. The azimuth angle at this time was 206 degrees.

The four angles I used on all of the panels, during the first set of tests, were 70 degrees, 58.3 degrees (this angle placed the panel perpendicular to the sun), 42 degrees, and 28 degrees. The second group of tests took place at 2:00 p.m. The azimuth angle at this time was 210 degrees.

The four angles I used on all of the panels, during the second set of tests, were 70 degrees, 59.7 degrees(this angle placed the panel perpendicular to the sun), 42 degrees, and 28 degrees.

Results

According to the test averages, the monocrystalline-hybrid solar panel was least affected by the change in angle, and the polycrystalline was the most affected by the change in angle.

This leads me to believe that the monocrystalline-hybrid would be the most productive because the earths rotation causes the sun angle to change constantly throughout the day.

Conclusions/Discussion

My hypothesis was supported because I thought that the angle the solar panel was mounted would affect the amount of power the panels produce. My data shows that all of the panels were affected by the change in angle; however, the monocrystalline-hybrid was the least affected, which means it would be the most productive throughout the day.

This project determined how solar panels power production is affected by the angle at which they are mounted.

Science Fair Project done By Joanie M. Kalmbach

 

 

<<Back To Topics Page...................................................................................>>Next Topic

Related Projects : Pull the Plug on Wasted Energy , Saving Energy , Saving the Earth One Panel at a Time , Shake Down , Shedding Light on Produce , Solar Air Heater , Solar Angle? , Solar Cells in Motion , Solar Cells: Will They Sprout in the New Green Economy? , Solar Concentrators for Battery Chargers