Kids Projects
 

Nanocrystalline Dye-Sensitized Solar Energy II

The Objective : This project is further to my 2009 science project. The objectives were: (1) to compare the photovoltaic energy generation capabilities of conductive glass-based and conductive polymer film-based Graetzel solar cells; (2) to determine if a polymer film solar cell generates more energy from exposure to sunlight than from lamplight; and (3) to see if a polymer film cell is capable of sustained energy generation over a several-day period.

Methods/Materials

I made several Graetzel solar cells from conductive polymer film, with filtered juice from dark red flower petals as the primary reactive agent.

Then I conducted a series of experiments to measure photovoltaic energy generation from those cells when exposed to lamplight compared to sunlight.

Next I compared the energy generation data from my 2009 science project (which involved conductive glass-based solar cells) with the results from this year's project (using conductive polymer film-based cells).

Then I conducted a series of experiments over three consecutive days to see if conductive polymer film-based cells could sustainably generate photovoltaic energy.

Results

A conductive polymer film-based cell produced a stronger electric charge, when exposed to either lamplight (263% more energy) or sunlight (51% more energy), than a similar solar cell made with conductive glass.

Polymer film cells produced from 18.1% to 47.5% more energy when exposed to sunlight than to lamplight.

When three sets of polymer film cells were exposed to sunlight over several days there was an increase in energy generation by anywhere from 142% to 211% from day 1 to day 2, with those levels generally sustained through day 3.

Conclusions/Discussion

I learned: (1) that conductive polymer film-based Graetzel solar cells generate measurably more low-level electrical voltage than conductive glass-based photovoltaic cells when exposed to either artificial lamplight or natural sunlight; (2) that polymer film-based cells generate more energy when exposed to sunlight than to lamplight; and (3) that conductive polymer film cells, when exposed to sunlight, are able to generate energy on a sustainable basis for a minimum of several days.

The results of this second project indicate that further, longer-term research into the comparative efficiency, durability, and sustainability of conductive polymer film cells versus conductive glass cells could be helpful and illuminating.

This project was to find the Generation of electricity from simple conductive polymer film-based photovoltaic solar cells, using plant juice.

Science Fair Project done By Sara K. Davis

 

 

<<Back To Topics Page...................................................................................>>Next Topic

Related Projects : Future Fuel , Gas of the Future , Generating Power Using Micro-Hydroelectric Generators , Harvesting Healthy Energy from Exercise , How Does Shading Affect the Power Output of Different Solar Panel , Nanocrystalline Dye-Sensitized Solar Energy II , Optimization of the Water Flow Rate in a Clean Energy Electrostatic Power Generator , Optimizing the Efficiency of Home Hydropower , Power House , Power Your Gadgets Using a Green Outlet

 

 

 

 

Copyright © www.kidsprojects.info 2012 through 2014

Designed & Developed by Freddy